Xerox 6030/6050 Wide Format Copy System Special features keys 75LEAD + 1.0 INLEFT - 1.0 INRIGHT + 0.0 INTRAIL + 0.0 INThe illustration below shows a negative left margin with TOP LEFTjustification.• To change the value setting, use the numeric keypad to enter thevalue. The values can be set in increments of 0.1 in (1.0 mm)and over a range of +4 to -4 in (+100 to -100 mm). Valuesoutside the allowed range are rejected. If you enter an invalidvalue, press the Exit key to clear it. The default margins are 0.6. Press the Enter key to confirm the setting. The graphical displayupdates accordinglyNOTE: To cancel the setting, press the Exit key7. When you have set all the margins as desired, press the Exitkey to return to the TRANSFORM MENU screen.The JUSTIFICATION option of the TRANSFORM MENU allows you toadjust the position of the image on the media.NOTE: "Image" means the entire scanned page including the whitespace.To specify the image position:1. Press the Transform key. The TRANSFORM MENU screen isdisplayed.2. Press the Next key to highlight JUSTIFICATION.3. Press the Enter key to select JUSTIFICATION. TheJUSTIFICATION screen is displayed. This screen shows thecurrent settings for the X and Y coordinates. It also includes agraphical display of the approximate position of the image as aresult of the settings.Below is an example of the JUSTIFICATION screen.JUSTIFICATIONX: LEFTY: CENTERJustification
