Xerox 6030/6050 Wide Format Copy System Scanning when using a Folder 53Scanning when using a FolderScanning when using a FolderWhen using a Folder, the document must be inserted in the correctorientation in order to have the title block visible after the copy is folded.Refer to the Finisher key information in the Special feature keys sectionof this manual for additional information to set up the desired fold andother Finisher options. Documents larger than 80 inches (2.1M) can onlybe partially folded.When using the Reduce/Enlarge feature and a Folder, you must orientand insert the document title block in the same orientation as theresulting enlargement or reduction copy size. In addition, therecommended media should be used.For example: the job requires that an A (A4) document be enlarged to aC (A2) document. To have the title block be visible after folding, the A(A4) document must be inserted as if it were a C (A2) document.You may want to refer to "CUSTOM R/E PRESETS" in the "Main Menu,COPY OPTIONS" section, and set up theREDUCTION/ENLARGEMENT default to show the standard reductionand enlargement. Set the reduction /enlargement to display A to C (A4to A2) above the keys.To ensure that the selected fold is made correctly, it is critical that thedocument be centered on the SCAN SYSTEM Document Feed Traywhen scanning.For additional folding and title block positioning information, refer to theFolder Operator Manual or the Folding Supplement CD.
