Xerox 6030/6050 Wide Format Copy System Main Menu 99WIDE FORMAT COPY SYSTEM is in the READY TO SCANmode. This timer can be set between 1 and 24 hours inincrements of 1 hour. When a file is scanned in, it is given a timestamp. When the age of the file on the hard disk exceeds thevalue of the FILE DELETION timer, the file is automaticallydeleted to allow space for new files. The default value is 24hours. After the files have been deleted, the directory will also bedeleted if no other files are scanned to it.To adjust a timer:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. TheCONFIGURATION menu screen is displayed.3. Press the Next key until TIMERS is highlighted.4. Press the Enter key to select TIMERS. The TIMERS screen isdisplayed.TIMERSFEATURE (0 — 99) MIN 60PRINTER INTERRUPT (1 — 99 MIN): 1FILE DELETION (1-24 HR): 245. Press the Previous or Next key to highlight the desired timer.6. Press the Enter key to select the highlighted timer.7. Use the numeric keypad to enter the timer value.8. Press the Enter key to confirm the value.9. Repeat steps 5 through 8 if you want to set the value foradditional timers.10. Press the Exit key to return to the CONFIGURATION menuscreen.The POWER SAVER option of the CONFIGURATION menu allows youto set the number of hours of inactivity after which the system goes intoPower Saver mode.To adjust the power saver:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. TheCONFIGURATION menu screen is displayed.3. Press the Next key until POWER SAVER is highlighted.4. Press the Enter key to select POWER SAVER. The POWERSAVER screen is displayed.POWER SAVER
