Xerox 6030 User Manual
Also see for Wide Format 6030: User guideUser guideSetup guideUser guideRelease note
                                                                                                                                                              | |
Contents
| 
100 Main Menu DocuWide 6030/6050POWER SAVERPOWER SAVER DELAY (0 − 4 HR): 35. Use the numeric keypad to enter the power saver value. Thevalid value range is 0 to 4 hours. The factory default is 3 hours.6. Press the Enter key to confirm the value.7. Press the Exit key to return to the CONFIGURATION menuscreen.The SCANNER CONTROL option of the CONFIGURATION menu allowsyou to set the options for how the SCAN SYSTEM starts and finishes ascan. It contains the following features:• AUTOSCAN - Tells the SCAN SYSTEM either to start the scanautomatically when the document is inserted (ENABLED), or towait until the Start key is pressed (DISABLED). ENABLED isthe factory default setting.• DOCUMENT RETURN - Tells the SCAN SYSTEM, after thescan, either to return the document to the front of the SCANSYSTEM (FRONT), or to drop the document from the rear of theSCAN SYSTEM into the catch tray (REAR). REAR is the factorydefault setting.NOTE: Refer to Controlling the Scan for additional information.• MODE:• MANUAL WIDTH - The user must enter the document widthand very carefully center the document. In this mode thedocument will be prescanned.• AUTOWIDTH - Enables the automatic detection of the widthof the document. . In this mode the document will beprescanned.• AUTOWIDTH/AUTOCENTER - Enables the automaticcentering of the image and automatic width detection. Thisselection is the default. . In this mode the document will beprescanned.• PRODUCTIVITY: This feature does not use AUTOCENTERrequiring the operator to manually align the document withinthe media guidelines on the Feed-in Tray. The width sensorseliminate the need for a prescan thereby increasing theoverall throughput of the system resulting in higherproductivity. When this feature is used the operator mustselect the media series, ANSI, ARCH, ISO A, ISO B JIS Band CUSTOM etc since the number of sensors provided cannot monitor every media type.To use the MODE: PRODUCTIVITY: CUSTOM the customSCAN SYSTEMCONTROL |
Related manuals for Xerox Wide Format 6030
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine