Xerox 700 Digital Color Press User Guide7-14MaintenanceClose the Front Door. If the door will not closecompletely, make sure the cartridge is in thelock position and the toner cartridge is installedinto the appropriate toner location.3. Remove the toner cartridge by holding thehandle on the top of the cartridge while gentlypulling it straight out. Be careful to not gettoner on clothing.4. Dispose the toner cartridge as normal officewaste or recycle the cartridge.5. Remove the new toner cartridge from itspackaging.6. Gently tilt the new cartridge up and down,and then left and right to redistribute the toner.7. Install the toner cartridge by aligning thearrows on the cartridge evenly with the printeruntil you hear a click.CAUTION:Never use a vacuum cleaner when you cleanspilled toner. It can cause explosion as thetoner fills the vacuum cleaner and gets sparks.Use a broom or a cloth moistened with aneutral detergent.Replacing the FuserThat completes the procedure for replacingthe toner cartridge.This procedure shows you how to remove aused Fuser and replace it with a new Fuser.The machine will tell you when you need toinstall a new one. The Fuser can be recycledso please follow the disposal instructions youreceive with the new cartridge.
