Problem SolvingXerox 700 Digital Color Press User Guide8-44Damaged PaperCorrective ActionProblemPaper is ripped, creased orwrinked. The edges or cornerscurl.Ensure that the paper loaded is within machinespecifications. Go to the Paper and Mediasection for information on paper specificationsand storage.Load a new ream of paper into the selectedpaper tray.Check that the Lighten/Darken scroll on theGeneral Settings tab is set to a darker setting.Light, Faint or FadedOutput is too light or washed out,solid areas not black or inconsistentshading. If there is a message about low toner on thescreen, replace the toner cartridge.If your original or output is 2 sided, check thatthe paper is not too thin.Double Image or Show ThroughThe output image repeats, has aghosting effect or shadows with areplica of the image. Check that the Lighten/Darken scroll on theGeneral Settings tab is set to a darker setting.Open, then fully close the Document Handler.If your original is too thin place it face down andto the rear left of the document glass. Place asheet of blank paper on top of the original.If the output is too thin, load thicker paper intothe selected paper tray.Open the front door and check that there areno obstacles in the paper path.Go to the Jam Clearance topic for information
