Problem SolvingXerox 700 Digital Color Press User Guide8-208.5" x 11"Bypass Tray (Tray 5) Jams occur in the paperpath clearance areas. The machine will displaya message indicating the clearance area.For more information on removing paper jamsfrom these areas go to the topic titled JamClearance within this chapter.If after clearing the jam, the Tray 5 feeder jamsor misfeeds again follow the steps on thefollowing pages.Bypass Tray (Tray 5) Jam or Misfeed PreventionFan the paper and load into the bypass tray.Ensure that the paper does not cover themaximum fill line.NOTE: Do not add paper to the tray when paperis already loaded. Instead, remove the paperand combine the additional paper with the paperfrom the tray and reload.Ensure that the Bypass Tray guides areagainst the edges of the loaded paper.Check that the Bypass Tray paper attributesare set correctly.Check that the paper is within specification.Document Specification: 8.5"x11" to 13"x19",300 gsm maximum, up to 250 sheets of 80gsm.
