AccessoriesXerox 700 Digital Color Press User Guide10-2High Capacity Stacker (HCS)2The High Capacity Stacker (HCS) is an optionalfinishing device that provides stacking and offsettingcapabilities for output to a Stacker Tray. The HCSconnects to the right side of the digital press by wayof the Interface Module. The HCS replaces theOffset Catch Tray (OCT).Interface ModuleHigh Capacity Stacker (HCS)The major components of the HCS are as follows:Identifying the components2. Top Tray - Up to 500 sheets are transported to theTop Tray:When sheets are purged after a paper jam.•When the Sample Set button is selected.•When selected as an Output Location.•Labels must be sent to the Top Tray.•Bypass - Only used when a secondstacking/finishing device is installed. This pathtransports collated sets through the HCS to aconnected finishing device or to another HCS.If your system configuration has two stackers, thebypass on the second stacker is not used.Stacker Tray/Cart - Collated sets (up to a total of5000 sheets) are transported to the Stacker Traylocated on a moveable Stacker Cart.4.Control Panel - Provides manual control of thevarious functions of the HCS.Overview
