AccessoriesXerox 700 Digital Color Press User Guide10-4HCS TraysSample prints can be printed by performing thefollowing steps:1.From the [Copy Output] feature, select:Collated or Uncollated•Output Destination/Offset Stacker•2.Select [Stacker - Stacker Cart] then [Real TimeSample Job].3.Select [Sample Job On].The [Sample Job On]feature delivers specific pages or sets of an outputjob to the High Capacity Stacker’s Top Tray.TheSample Job allows the user to check the outputwhile continuing to deliver the major portion of thejob to the Stacker Cart.For Collated output, for example, if the output•is 100 sets of a 50-page original document,the user can choose 1-3 output sample sets.For Uncollated output, for example, if the•output is 100 copies of each page of a 50-page original document, the user canchoose 1-3 sample pages4.Enter the desiredSample pages/sets to print for the [FirstSample] and then for the [Second Sample]and [ThirdSample] (if applicable).5.Select[Save].Sample Print featureTop TrayThe Top Tray offers the following:Copies/prints are aligned easily without folds•or winkles in the output.To enable easier pick-up of the ouput•copies/prints, the HCS can be stopped byselecting the Stop button on the machine'sUI.
