Manual Dial991Manual DialPick up the optional handset or the handset of the external telephone and dial.When the line is connected and you hear a high-pitched tone, press the {Start}key to send your fax document. If, on the other hand, you hear a voice at the oth-er end, continue conversation as normal.Important❒ The optional handset or an external telephone is required.❒ This function is not available for the optional extra G3 interface unit, InternetFax and IP-Fax.❒ If Immediate TX Result Report (Immediate Transmission) is printed, the re-sult of a transmission with Manual Dial is not mentioned in the report.A Place the original, and then select the scan settings you require.B Pick up the handset.You will hear a dial tone.C Dial.The machine immediately dials the destination.If you make a mistake, replace the handset, and then try again from step B.To select a destination from the Address Book, see “Using the Address Bookto Specify Destinations”.D When the line is connected and you hear a high-pitched tone, press the{Start} key to send your fax document.If you hear a voice, tell the receiver that you want to send them a fax docu-ment (ask them to switch to facsimile mode).The transmission starts.E Replace the handset.If you want to cancel a transmission, press the {Clear/Stop} key, and then re-move the originals.After transmission, the standby display appears.
