Reception1583Transferring Received DocumentsThe machine can transfer received documents by using SUB Codes.Originals sent with a SUB Code that matches the SUB Code programmed as aTransfer Box are received then relayed to the programmed receiver.Important❒ Transfer Boxes and Receiving Stations must be set up in order to transfer re-ceived documents. Transfer Boxes can be programmed in “Box Setting” in theFacsimile Features menu.Note❒ When e-mail addresses are programmed as receivers, received documentsare sent in an e-mail format to the receivers.❒ Transfer results are not sent back to the requesting party.❒ You can transfer data received from any fax machine, regardless of manufac-turer.Reference“Facsimile Features”, General Settings GuideSUB Code Transfer ReportYou can check the results of transmission to Receiving Stations. The machineprints this report when it has finished transmitting to Receiving Stations.Note❒ You can select whether the SUB Code Transfer Report be automatically print-ed using the User Parameters (switch 04, bit 1) in the Facsimile Featuresmenu.❒ You can set whether a portion of the original image is printed on the reportwith the User Parameters (switch 04, bit 7) in the Facsimile Features menu.❒ “Unprogrammed” indicates the document could not be sent because the endreceiver is not programmed.❒ “--” indicates that the Internet Fax document was sent to the mail server pro-grammed in this machine.❒ For the maximum number of destinations you can program in a group, see“Maximum Values”.Referencep.278 “Maximum Values”“Facsimile Features”, General Settings Guide
