Sending Fax Documents from Computers2536D Click [Send] or [Send & Print].Note❒ You can confirm transmission results using the E-mail TX Results functionand the Communication Result Report. You can set whether to use both ofthese together in User Parameters (switch 10, bit 6) in the Facsimile Fea-tures menu.❒ If there be any insufficient configurations in the e-mail menu on this ma-chine, or if “Auto Specify Sender Name” is set to “Off”, the LAN-Fax resultnotification e-mail is not transmitted, and the LAN-Fax Result Report isprinted. See “System Settings”, General Settings Guide for the e-mail set-tings, and see “LAN-Fax Result Report” for the LAN-Fax Result Report.Referencep.194 “Communication Result Report (Memory Transmission)”p.253 “LAN-Fax Result Report”“System Settings”, General Settings Guide“Facsimile Features”, General Settings GuideLAN-Fax Result ReportThis section explains the LAN-Fax Result Report.If “E-mail TX results” is set to “Notify”, if there be any insufficient configura-tions in the e-mail menu on this machine, or if “Auto Specify Sender Name” isset to “Off”, the LAN-Fax result notification e-mail is not transmitted, and theLAN-Fax Result Report is printed. If the “E-mail TX Results” of “Sender Name”has not been set to on, the LAN-Fax Result Report is printed.Note❒ Whether or not the LAN-Fax Result Report is printed, can be configured withUser Parameters (Switch 20, bit 0) in the Facsimile Features menu.❒ When executing [Send] or [Send & Print] with the LAN-Fax Driver, and whenthe E-mail TX Result Report has not arrived, the Communication Result Re-port is printed.Referencep.194 “Communication Result Report (Memory Transmission)”“Facsimile Features”, General Settings Guide
