Printing Options1713Just size printingIf you enable this function, received documents are printed on the sheet that hasthe highest priority.This function is enabled with User Parameters (switch 05, bit 5) in the FacsimileFeatures menu.If the paper tray is not stocked with paper of a suitable size to print a receiveddocument, a message appears on the display prompting you to load paper of therequired size. When you have loaded new paper, press [Exit] to print the docu-ment.Note❒ After pressing [Exit], procedure varies depending on machine status when themessage occurred.• If any received documents or reports were being printed automatically, theprinter automatically continues printing from where it left off.• If any documents or reports were being printed manually, the printer doesnot resume printing. Perform the operation from the beginning again.Reference“Facsimile Features”, General Settings GuideHaving incoming documents printed on paper from the bypass trayYou can print documents sent from Specified Senders on paper from the bypasstray.Set as follows:• Program a special sender and select the Bypass Tray for the paper tray type.• In “Program Special Sender” in the Facsimile Features menu, turn on the“Special Reception Function” in “Initial Set Up”.Important❒ When using this function, printed sheets cannot be delivered to the finisheroutput tray. Even if you specify the finisher output tray, sheets are deliveredto the Internal Tray 1.
