Transmission Modes191Parallel Memory TransmissionThis function dials while the original is being scanned.Standard Memory Transmission stores the original in memory, then dials thedestination. However, Parallel Memory Transmission allows you to confirm theconnection status quickly. In addition, this function scans the original faster thanImmediate Transmission. This is useful when you are in a hurry and need to usethe original for another purpose.Important❒ Standard Memory Transmission is used instead of Parallel Memory Trans-mission in the following cases:• When the line is busy and could not be connected to• With Send Later• When you store an original for Memory Transmission while another com-munication is in progress• When two or more destinations are specified• When an original is placed on the exposure glass, and then sent• When you send documents stored in the Document ServerNote❒ You can turn this function on or off with the User Parameters (switch 07, bit2) in the Facsimile Features menu.❒ Standard Memory Transmission may be used instead of Parallel MemoryTransmission depending on the optional equipment installed if there is notenough free memory left.❒ If you use this function, the Memory Storage Report will not be printed.❒ If the {Clear/Stop} key is pressed, the original will jam or memory will run outwhile Parallel Memory Transmission stops. The Communication Result Re-port is printed and files are deleted.❒ When using Parallel Memory Transmission, only the page number is printedon the header of the fax, the total number of originals is not automaticallyprinted.Reference“Facsimile Features”, General Settings Guide
