Xerox CopyCentre C118 System Administration Manual

Also see for Copycentre C118: User guide User manual Module guide Network guide Quick installation card

Contents

Xerox CopyCentre C118 System Administration Manual Manual pdf 119 page image

Problems using a UNIX EnvironmentXerox CopyCentre/WorkCentre 118 System Administration Guide 119When the document cannot be deleted from the printer windowProblems using a UNIX EnvironmentThis section explains what to do when a problem occurs while using UNIX. Thepossible causes, confirmation methods, and actions are as follows. If a problem stillexists after the corrective action has been performed, follow the Problem SolvingProcedures on page 111 to seek further assistance.When printing fails – page 119When the required printing result is not obtained – page 121When printing failsThe number of sessionsexceeds the maximum.Check that the machine isprocessing simultaneousrequests (such as printrequest or status inquiryrequest) from multiple clients.In Windows 95/Windows 98/Windows NT 4.0, the writeerror dialog, which indicatesinsufficient memory for thewaiting print job is displayed.Wait for a while, send a printrequest again. Alternatively,increase the [MaximumSessions] in the SMB settingfile [config.txt]. Then switchthe power off and on. (Onlythe Key Operator)Cause Confirmation Method ActionCause Confirmation Method ActionAn attempt is made to deleteall documents displayed inthe printer window. (Only theKey Operator)Check whether the attempt ismade to delete the print jobfrom the Printer menu in theprinter window.Delete the print job from theDocument menu in the printerwindow.The document owner isinvalid.Check whether the owner ofthe selected documentmatches the Windows log-inname.Use the owner name of thedocument to log in toWindows, then delete thedocument.Service Pack 4.0 or later isnot installed in the system.(In Windows NT 4.0)Check the Service Packversion displayed to bedisplayed when you startWindows NT 4.0.Install Service Pack 4.0 orlater.Cause Confirmation Method ActionThe IP address is not correct. Check whether the IPaddress of the machine iscorrect.Specify the correct IPaddress for the machine.