Xerox CopyCentre C118 System Administration Manual

Also see for Copycentre C118: User guide User manual Module guide Network guide Quick installation card

Contents

Xerox CopyCentre C118 System Administration Manual Manual pdf 68 page image

6 Microsoft Networking68 Xerox CopyCentre/WorkCentre 118 System Administration GuideChanging the SettingsThis section explains how the Key Operator uses [config.txt] to change the SMBsettings.ProcedureThe steps below explain how to overwrite [config.txt] for the machine using a Windowsnetworked computer. You will need the following information: SMB Host Name,Workgroup, Key Operator Name, and Key Operator Password.1. Open [Network Neighborhood] from the Windows computer, followed by[Workgroup] (default: Workgroup) and then the [printer].NOTE: The default host name of the machine is FX-xxxxxx, where xxxxxx is the lastsix characters of the MAC address of the machine. You can check the name byreferring to SMB Host Name on the System Settings List.NOTE: This method does not enable printer search across subnets.For printer search across subnets, you should set the WINS server or edit[LMHOSTS]. For details about [LMHOSTS], refer to your Windows manual.2. Double click the [admintool] folder.3. For Windows 95/Windows 98/Windows Me, enter the password (SMBAdministrator Password) only. For Windows NT 4.0/Windows 2000/Windows XP,enter the user name (SMB Administrator Name) and password (SMBAdministrator Password).Then, click [OK]. The [admintool] folder will be opened.NOTE: The factory default for the Key Operator Name is [admin], and the default KeyOperator Password is "x-admin". You are advised to change the name and passwordfrom the default ones.4. Open [config.txt] using a text editing application, for example Notepad.NOTE: [Config.txt] can also be changed from CentreWare Internet Services.5. Make changes to the appropriate items, and then save and close [config.txt].NOTE: For more information about [config.txt], refer to Setting Format of config.txt onpage 69.The [message.txt] file is then created inside the [admintool] folder.6. Open [message.txt] and check that it displays the information shown in thefollowing table.NOTE: If [message.txt] is not displayed, select [Refresh Status] from the [View] menu.If an error message appears, check the information has been set correctly in[config.txt].7. Close [message.txt].