Xerox CopyCentre C118 System Administration Manual

Also see for Copycentre C118: User guide User manual Module guide Network guide Quick installation card

Contents

Xerox CopyCentre C118 System Administration Manual Manual pdf 98 page image

11 CentreWare Internet Services98 Xerox CopyCentre/WorkCentre 118 System Administration Guide1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [ProtocolSettings] folder.3. Select [SMB].4. Set up the following options to be displayed in the frame.• Workgroup• Host Name• Administrator Name• Administrator Password• Re-enter Password• Maximum Sessions• TBCP Filter (Only available when the optional PostScript Kit is installed.)• Unicode Support• Auto Master Mode• Encrypt PasswordNOTE: For more information about the options, refer to Properties in the CentreWareInternet Services chapter of the User Guide.5. Select [Apply New Settings] to reflect the new setting.6. Enter the user ID and password, then select [OK].NOTE: The default user ID is "admin" and the default password is "x-admin".7. When the reboot message appears, select [Reboot].NetWareThis page allows you to configure the NetWare settings for the following options.NOTE: Some settings on this page will only be available after you reboot the machinefrom CentreWare Internet Services, or after the machine is switched off and on.1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [ProtocolSettings] folder.3. Select [NetWare].4. Set up the following options to be displayed in the frame.• Host Name• Active Mode