Xerox CopyCentre C118 System Administration Manual

Also see for Copycentre C118: User guide User manual Module guide Network guide Quick installation card

Contents

Xerox CopyCentre C118 System Administration Manual Manual pdf 79 page image

Parallel Port InstallationXerox CopyCentre/WorkCentre 118 System Administration Guide 794. Switch on the machine.Next, enable the Parallel port.NOTE: CentreWare Internet Services can also be used to configure the machine.Refer to the CentreWare Internet Services chapter.1. Press the button.2. Select [System Settings].3. Enter the password using the numeric keypad and then select [Confirm].4. Select [Print Settings] and then press the button.5. Press the button on the [Network/Port] screen.6. Select [Parallel] by selecting [T] or [S] and then press the button.7. Select [Port Status] by selecting [T] or [S] and then press the button.8. Select [Enable] by selecting [T] or [S] and then press the button.Depending on your requirements, change the following communication parameters onthe machine.• Print Mode• PJL• Auto Eject Time• Adobe Protocol• Bi-directionalNOTE: Adobe Protocol can be set when the PostScript Kit (optional) has beeninstalled.NOTE: Except for Bi-directional, there is no need to change the default setting of theother items for normal use. However, it may be necessary to make changesdepending on the OS of each computer.9. Press the button.Workstation SetupPerform the following steps.1. Refer to the HTML documentation on the CentreWare Utilities CD-ROM, andinstall the drivers for the machine on all the workstations that will be sending jobsto the machine.2. Continue with Test Print on page 79.Test PrintTo make sure that the machine has been installed on the parallel port correctly, submita test print from a client workstation. Perform the following steps.