Xerox CopyCentre C118 System Administration Manual

Also see for Copycentre C118: User guide User manual Module guide Network guide Quick installation card

Contents

Xerox CopyCentre C118 System Administration Manual Manual pdf 96 page image

11 CentreWare Internet Services96 Xerox CopyCentre/WorkCentre 118 System Administration Guide1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings]folder.3. Select [Ethernet].4. Set up the following options to be displayed in the frame.• Ethernet SettingsNOTE: For more information about the options, refer to Properties in the CentreWareInternet Services chapter of the User Guide.5. Select [Apply New Settings] to reflect the new setting.6. Enter the user ID and password, then select [OK].NOTE: The default user ID is "admin" and the default password is "x-admin".7. When the reboot message appears, select [Reboot].ParallelThis page allows you to configure the parallel port settings for the following options.1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings]folder.3. Select [Parallel].4. Set up the following options to be displayed in the frame.• Bi-directional Communication• Auto Eject Time• Adobe Communication Protocol (Only available when the optional PostScript Kit isinstalled.)NOTE: For more information about the options, refer to Properties in the CentreWareInternet Services chapter of the User Guide.5. Select [Apply New Settings] to reflect the new setting.6. Enter the user ID and password, then select [OK].NOTE: The default user ID is "admin" and the default password is "x-admin".USBThis page allows you to configure the USB settings for the following options.1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.