Xerox® DocuMate® 4790User’s Guide9-1539Scanner Options,Maintenance andTroubleshootingThis section contains information on hardware options available for your scanner, the scanner User Utility,maintenance instructions, troubleshooting, uninstalling, scanner specifications, and spare parts.Changing the Background ColorYou can change the scanner’s background plate color between black and white. The background color isimportant as it may affect the cropping quality of the scanned document. Each scanning application is differentso you should choose the color (black or white) based on the best results you see in the final scanned documentfile. The default background plate is black.Your scanner has two scanning lamps, which allows for duplex (two-sided) scanning. You must change thebackground plate for both lamps at the same time.1. Turn off the scanner power.2. Open the scanner. Make sure there is at least 18 inches of room above the scanner to safely open thescanner completely.3. Locate the background plates in the top and bottom of the scanner.4. Rotate the reference plate (F) (①) and the reference plate (B) (➁).– With both hands, slowly rotate each plate in the direction indicated by the arrow.