Xerox® DocuMate® 4790User’s Guide6-276Scanning andConfiguring One TouchBased on the recommended full installation of the scanner driver and the Visioneer One Touch software,One Touch is your main scanning interface for using the scanner.The One Touch Button Panel, that you see on the computer screen, shows the pre-set function for each button(such as Email) and the icon of the destination (called the Destination Application) where the images will besent when scanning is finished.Default One Touch SettingsWhen you installed the scanner, the software configured each One Touch button with appropriate settingsconsisting of: a Destination Application, a Scan Configuration, and a File Format. The button names, such asEmail or Copy, indicate the original factory settings for a button. You can change any of these settings. Please seeChanging the Button Settings on page 29 for instructions.For example, the Email button is set up to scan documents then immediately attach them to a new emailmessage in your default email program. The email application will default to the email program specified in theinternet options of Internet Explorer.A folder icon for a button means that the button is set up to archive the scanned item. The scanner sends thescanned image directly to a folder without opening the image first in a software application.A question mark for a button means your computer does not have the appropriate software or hardware for theinitial factory settings.The One Touch button panel shows whichapplication the button is configured to sendimages to.