Print Quality10-16Copy-Quality ProblemsWhen the copy quality is poor, select the closest symptom from the following table to correct the problem.If the copy quality does not improve after carrying out the appropriate action, contact the Fuji Xerox localrepresentative office or an authorised dealer.Symptom Reason/ActionLines or streaks onlypresent in copies madefrom the ADFThere is debris on the document glass. When scanning, the paper from the ADFpasses over the debris creating lines or streaks.Clean the glass with a lint free cloth.Spots present in copiestaken from the documentglassThere is debris on the document glass. When scanning, the debris creates a spot onthe image.Clean the glass with a lint free cloth.The reverse side of theoriginal is showing on thecopyOn the Copy menu, enable Auto Exposure.For information on turning Auto Exposure on and off, see Setting Auto Exposure onpage 6-7.Light colors are washed outor white on the copyAuto Exposure is enabled.On the Copy menu, enable Auto Exposure.For information on turning Auto Exposure on and off, see Setting Auto Exposure onpage 6-7.Image is too light or dark If the copied image is too light or dark, use the Lighten/Darken option on theCopy menu.For information on making the image lighter or darker, see Making an Image Lighteror Darker on page 6-5
