Loading Paper5-9Loading PaperThis section includes:■ Loading Paper in the Manual Feeder on page 5-9■ Loading Paper in Tray 1 on page 5-11Loading Paper in the Manual FeederYou can print on the following types of media:■ Plain paper■ Card stock■ Labels■ Envelopes■ Glossy paper■ Specialty media including business cards, postcards, trifold brochures, and weatherproof paper■ Pre-printed paper (paper already printed on one side)■ Custom size paperSee also:About Paper on page 5-6Loading Paper in the Manual FeederIn addition to plain paper, the Manual Feeder can use various other sizes and types of print media, such asenvelopes.Make sure of the following points when loading paper in the Manual Feeder.You can load one sheet of the standard paper (60 – 216 gsm) at a time. The minimum size that can beloaded in the Manual Feeder is 76.2 x 127 mm (3 x 5”).■ The dimensions of print media that the Manual Feeder can handle are:■ Width: 76.2 –215.9 mm■ Length: 127.0 –355.6 mmMake sure of the following points to avoid any problems during printing:■ Load paper one by one in the Manual Feeder.■ Use high quality paper for laser printers to print at high quality. See About Paper on page 5-6.■ Do not remove or add paper to the Manual Feeder when printing. Doing so may cause a paper jam.■ Always load paper short-edge feeds.Note: Depending on the paper size, loading long-edge feed may be available for custom size paper.
