Xerox DocuPrint C1190 FS User Manual

Contents

Xerox DocuPrint C1190 FS User Manual Manual pdf 68 page image

Loading Paper5-11Loading Paper in Tray 1Use Tray 1 for a wide range of media including:■ Plain paper■ Thin card stock■ Thick card stock■ Glossy paper■ Thick Glossy paper■ LabelsSee also:Printing on Specialty Media on page 5-24Loading Paper in Tray 1This section describes how to load paper in Tray 1.Important: Do not remove the tray during printing. It may cause a paper jam.1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, andremove it from the printer.2. Slide the width guides to the edge of the tray. The width guides should be fully extended.Note: When loading paper that is 210 mm (A4) wide, such as Letter-size or Legal-size paper, set thetab on the side of the tray to the (A4) position.