Technical information7-8 DocuTech 61xx Operator GuideStock satisfaction guidesTable 7-5. Satisfaction guide for paper trays 1 and 2StockReliable feeds may beexpectedLess reliable feeds may beexpected Suggested alternativesSize 8 x 10 inches to 9 x 14inches (203 x 254 mm to229 x 356 mm)Stock smaller than 8 x 10inches cannot be used.For stock larger than 9 x 14inches (229 x 356 mm), referto the tray 3 satisfactionguide.Weight Substance 20 to 110 (75 to200 g/m2)Substance 16 to 19 (60 to 72g/m2)Weights outside the limitsshown are notrecommended.Substance 110 (200 g/m2)must be long grain. Do notuse short grain.Capacity Tray 1 - 1100 sheets,substance 20 (75 g/m2)Tray 2 - 600 sheets,substance 20 (75 g/m2)For greater capacity, useTray 3.Type orconditionXerographic bond paper ingood conditionDrilled stock, fannedthoroughlyTab stock in perfectly flatconditionSlightly curled paperIntermixed weightsTransparenciesLabel stockAdhesive drafting filmPaper with reinforced edgesDo not use excessivelycurled paperSubstance 110 (200 g/m2)must be long grain. Do notuse short grain.Use transparencies with awhite stripe.Freshly printed offset prints,use tray 3.Refer to the “Using variousstocks” section for any stocknot defined in this guide.Table 7-6. Satisfaction guide for paper tray 3StockReliable feeds may beexpectedLess reliable feeds may beexpected Suggested alternativesSize 8 x 10 inches to 17 x 11inches (203 x 254 mm to432 x 279 mm)Smaller or larger sizescannot be used.
