Service Manual 9-3Using the Parts List1. No.: The callout number from the exploded part diagram.2. Part Number: The material part number used to order specific parts.3. Qty: This number represents the parts per printer, not the number of partssupplied in the actual part order.4. Name/Description: Details the name of the part to be ordered and the number ofparts supplied per order.5. Parts identified throughout this manual are referenced PL#.#.#. For example,PL3.1.10 means the part is item 10 of Parts List 3.1.6. A black triangle preceding a number followed by a parenthetical statement in anillustrated parts list means the item is a parent assembly, made up of theindividual parts called out in parentheses.7. The notation “with X~Y” following a part name indicates an assembly that ismade up of components X through Y. For example, “1 (with 2~4)” means part 1consists of part 2, part 3, and part 4.8. An asterisk (*) following a part name indicates the page contains a note aboutthis part.9. The notation (NS) next to a part indicates that particular part is not spared, butcontained in a kit or major assembly.10. The notation “J1<>J2 and P2” is attached to a wire harness. It indicates thatconnector Jack 1 is attached to one end of the wire harness and connector J2 isattached to the other end that is plugged into P2.NoteOnly parts showing part numbers are available for support. Parts not showingpart numbers are available on the parent assembly.Legend:Identifier MeaningC C-ringE E-ringKL KL-clipS Screw
