Maintenance126 Xerox ® VersaLink ® B400 PrinterUser GuideAdjustments and Maintenance ProceduresThis section includes:• Adjusting Paper Registration .....................................................................................................................................126Adjusting Paper RegistrationUse Adjust Paper Registration to adjust the placement of the printed image on the page. Theadjustment allows you to place the top, bottom, left, and right margins exactly where you want.You can specify the image position on both the front and back sides of the paper, for each installedpaper tray.Verifying Paper Registration1. At the printer control panel, press the Home button.2. Log in as administrator. For details, refer to Logging In as the Administrator.3. Touch Device > Support > Image Position.4. Select the source paper tray for the registration print.a. Touch Paper Supply.b. Touch the desired tray.5. If your printer has automatic 2-sided printing, select the sides that you want to optimize.− To select a sample registration page for adjusting side 1, touch Adjusted Side, then touchSide 1.− To select a sample registration page for adjusting both sides, touch Adjusted Side, thentouch Side 2.6. Specify the consecutive number of sample pages to print.a. Touch Print Settings.b. To increase or decrease the number of sample pages, for Quantity, touch Plus (+) or Minus (-),then touch OK.7. To print the sample pages, touch Print Sample.8. When printing is completed, touch Close.
