Getting Started38 Xerox ® VersaLink ® B400 PrinterUser GuideNote: If the printer was installed previously in a wireless network environment, it could retain setup andconfiguration information from that environment. To prevent the printer from attempting to connect tothe previous network, reset the wireless settings. For more information, refer to theSystem AdministratorGuide at www.xerox.com/office/VLB400docs.Connecting to Wi-Fi DirectYou can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,using Wi-Fi Direct. Wi-Fi Direct is disabled by default.Note: Wireless networking is available only on printers with the optional Wireless NetworkAdapter installed.To connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting with Wi-Fi Direct from Your Mobile DeviceTo connect with Wi-Fi Direct, follow the directions provided with your mobile device.Initial Printer SetupBefore installing the printer software, verify that the printer is set up correctly. Setup includes enablingthe optional features and assigning an IP address for the Ethernet network connection. The installationwizard starts automatically the first time the printer is started. The installation wizard prompts theSystem Administrator to configure the following settings:• Language• Network Connection• Proxy Server Setup• Date and Time• Measurements• LDAP Settings• Apps Setup• Security SettingsFor more information on configuring the printer settings, refer to theSystem Administrator Guide atwww.xerox.com/office/VLB400docs.
