Cleaning the PrinterCleaning the ExteriorClean the exterior of the printer once a month.• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft cloth.• After cleaning, wipe with a dry, soft cloth.• For stubborn stains, apply a small amount of mild detergent to the cloth and gently wipe the stainoff.CautionDo not spray detergent directly on the printer. Liquid detergent could enter the printer through a gapand cause problems. Never use cleaning agents other than water or mild detergent.Cleaning the InteriorWarning• Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet ofpaper is wrapped around the heat roller, do not try to remove it immediately. Power off the printerimmediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer hascooled.• If you spill any toner in the printer, remove the toner using a moist cloth. Never use a vacuum cleanerto remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printerregularly. Clean the printer interior whenever you replace the drum cartridge.After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closingthe printer covers and doors.• Remove any remaining pieces of paper or debris. For more information, refer to Clearing Paper Jams.• Remove any dust with a dry, clean cloth.Cleaning the LED Lens1. Open the Front Door of the printer.Xerox® VersaaLink® B600/B610 Printer7-2User GuideMaintenance
