Printer is Making Unusual NoisesSolutionsProbable CausesPower off the printer, then remove the obstruction ordebris. If you cannot remove the obstruction, contactyour Xerox representative.There is an obstruction or debris inside the printer.Paper Tray Will Not CloseSolutionsProbable CausesThe paper tray does not fully close. • If the tray is extended for legal-size paper, the trayprotrudes when it is inserted into the printer. Formore information, refer to Configuring Trays 1 or 2for the Paper Length.• Some debris or an object is blocking the tray.• The tray is blocked by the table or shelf on which itis located.• If the paper lift plate at the back of the tray is notlocked down, replace the tray.Condensation Has Formed Inside the PrinterMoisture can condense in the printer when room humidity exceeds 85% or when a cold printer is locatedin a warm room. Condensation can form in a printer after it has been sitting in a cold room that is heatedquickly.SolutionsProbable CausesAllow the printer to operate for several hours at roomtemperature.The printer has been sitting in a cold room.The relative humidity of the room is too high. • Reduce the humidity in the room.• Move the printer to a location where the temperatureand relative humidity are within the operating spe-cifications. For more information, refer to Environ-mental Specifications.8-5Xerox® VersaaLink® B600/B610 PrinterUser GuideTroubleshooting
