8. Connect the printer to your computer with a USB cable or to a network using an Ethernet cable.9. Power on the printer.Resetting Wireless SettingsIf the printer was previously installed in a wireless network environment, it could retain setup andconfiguration information. To prevent the printer from attempting to connect to the previous network,reset the wireless settings.To reset the wireless settings:1. At the printer control panel, press the Home button.2. Touch Device > Connectivity > Wi-Fi.3. Touch the network selection that you want to reset.4. Touch Forget This Network.5. At the prompt, touch Forget & Reboot.Connecting to a Network with a Wi-Fi Protected SetupWi-Fi Protected Setup (WPS) is a network standard for setting up a wireless network. The WPS protocolsenable you to set up devices in a secure wireless network without having wireless networking experience.With a WPS-certified router, you can use tools in the router and the printer to connect the printer to thenetwork. To use the tools, ensure that the wireless router is configured properly and is compliant withthe WPS.• Push Button Connection (PBC) is the easiest way to connect the printer to a wireless network. Itautomatically connects when you push a button on the router and on the printer. After the routerand printer exchange information, the printer accepts the security and configuration information2-17Xerox® VersaaLink® B600/B610 PrinterUser GuideGetting Started
