Paper JamsLocating Paper JamsWarningNever touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet of paperis wrapped around the heat roller, do not try to remove it immediately. Power off the printer immediatelyand wait 40 minutes for the fuser to cool. Try to remove the jam after the printer has cooled. If the errorpersists, contact your Xerox representative.CautionDo not attempt to clear any paper jams using tools or instruments. This can permanently damage theprinter.The following illustration shows where paper jams can occur along the paper path:4.1. Bypass TrayTray 22. 5.Optional Mailbox or Finisher Tray 13. FuserMinimizing Paper JamsThe printer is designed to function with minimal paper jams using Xerox-supported paper. Other papertypes can cause jams. If supported paper is jamming frequently in one area, clean that area of the paperpath.The following can cause paper jams:• Selecting the incorrect paper type in the print driver• Using damaged paper• Using unsupported paper• Loading paper incorrectly• Overfilling the trayXerox® VersaaLink® B600/B610 Printer8-6User GuideTroubleshooting
