8TroubleshootingGeneral TroubleshootingThis section contains procedures to help you locate and resolve problems. Resolve some problems bysimply restarting the printer.Printer Does Not Power OnCautionPlug the three-wire cord with grounding prong directly into a grounded AC outlet.SolutionsProbable CausesAt the printer control panel, press the Power/Wakebutton. For more information, refer to Power Options.The power switch is not turned on.Power off the printer, then plug the power cord securelyinto the outlet.The power cord is not plugged into the outlet correctly.Power off the printer, then unplug the power cord andwait 30 seconds. Plug the power cord into the outlet se-curely, then press the Power/Wake button.The printer requires a full reset.Plug another electrical appliance into the outlet, thencheck if it operates properly.Try a different outlet.Something is wrong with the outlet connected to theprinter.Use a power source with the specifications listed in theElectrical Specifications.The printer is connected to an outlet with a voltage orfrequency that does not match the printer specifications.8-1Xerox® VersaaLink® B600/B610 PrinterUser Guide
