Environmental Benefits of Duplex PrintingMost Xerox products have duplex printing, also known as 2-sided printing, capability. This enables youto print on both sides of the paper automatically, and therefore helps to reduce the use of valuableresources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires thaton models greater than or equal to 40 ppm color or greater than or equal to 45 ppm monochrome theduplex function has been auto-enabled, during the setup and driver installation. Some Xerox modelsbelow these speed bands may also be enabled with 2-sided printing settings defaulted on at the timeof install. Continuing to use the duplex function will reduce the environmental impact of your work.However, should you require simplex/1-sided printing, you may change the print settings in the printdriver.Paper TypesThis product can be used to print on both recycled and virgin paper, approved to an environmentalstewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper(60 g/m²), which contains less raw material and thus saves resources per print, may be used in certainapplications. We encourage you to check if this is suitable for your printing needs.Regulatory Information for 2.4-GHz and 5-GHz Wireless Network AdapterThis product contains a 2.4-GHz and 5-GHz Wireless LAN radio transmitter module that complies withthe requirements specified in FCC Part 15, Industry Canada RSS-210, and European Council Directive2014/53/EU. Radio Frequency (RF) output power of this device will not exceed 20 dBm in either frequencyband.Operation of this device is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesiredoperation.Changes or modifications to this device not specifically approved by the Xerox Corporation may voidthe user's authority to operate this equipment.United States FCC RegulationsThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuantto Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy. If the equipment is not installedand used in accordance with these instructions, it can cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference. Users are requiredto correct the interference at their own expense.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.B-3Xerox® VersaaLink® B600/B610 PrinterUser GuideRegulatory Information
