System Administrator Menu SettingsXerox® Wide Format IJP 2000User Guide5-19TCP/IP - IP ModeAllows you to select the TCP/IP Internet protocol type.The factory default is IPv4 Mode.IPv4 ModeSelect this to fix the Internet protocol to be used to IPv4.IPv6 ModeSelect this to fix the Internet protocol to be used to IPv6.Dual StackSelect this to use both IPv4 and IPv6 as the Internet protocol.IPv4 - IP AddressEnter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.The first "xxx" cannot be set to numeric value 127 or 224 to 255.The factory default is 192.168.150.150.IPv4 - Subnet MaskEnter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.The factory default is 255.255.255.0.IPv4 - Gateway AddressEnter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.The first "xxx" cannot be set to numeric value 127 or 224 to 255.The factory default is 192.168.150.1.IPv6 Address Manual SetTo enter an IP address and Gateway address manually, select Enabled.The factory default is Disabled.
