AppendixXerox® Wide Format IJP 2000User Guide6-4Notes on manual feedWhen printing with manual feed, printing on paper of a size smaller than the output size can causecontamination of the interior of the machine.Ink consumption• Even if you specify black and white mode, color inks are consumed because the machine usesProcess Black to print black.• The color inks are consumed because the machine periodically performs color printing outside themedia to prevent the print head being dried up, and because the machine uses ink to perform theprint head cleaning.Continuous printIn a continuous printing, for optimal image quality, the machine stops operation and performs themaintenance procedure for about 10 seconds per approximately 15 prints. Printing resumes as soon asthe maintenance procedure completes.Notes and Restrictions for IPv6 Connection• In a multi-prefix environment (where multiple IPv6 global addresses are used), data transmissionfrom the machine to a device installed on another network may fail.• In a multi-prefix environment (where multiple IPv6 global addresses are used), an address that isnot assigned to the machine may be used for communication.• An auto-configured IPv6 address (IPv6 auto-configuration address, IPv6 DNS server address) maybe assigned an address that cannot be used by the obtained IPv6 address for operation.An address that cannot be used for operation is, for example, a site local address (fec0::) or anaddress that belongs to the documentation address space (2001:db8::/32).• The machine may use the DNS information for IPv4 rather than that for IPv6 if the machine is inDual Stack mode, the DNS information for both IPv4 and IPv6 is configured, the machine is tocommunicate with a device that is specified using the FQDN, and the machine has just beenturned on.• The machine may display an incorrect machine address.For example, either the IPv4 or IPv6 address may not be displayed in Dual Stack mode, or adifferent IPv6 address may be displayed.• WINS does not support IPv6 communication.• In an IPv4 environment, discovery across routers via broadcast can be performed. However, this isnot possible in an IPv6 environment. Also, because an IPv6 environment does not supportdiscovery across routers, only multicast in an local link (FF02::1) can respond to multicasting.