Xerox® Wide Format IJP 2000User GuidexivElectrical SafetyWarning NotesWARNING:• This product shall be operated by the power source as indicated on the product's data plate.Consult your local power company to check if your power source meets the requirements.• Connect this product to a protective earth circuit.This product is supplied with a plug that has a protective earth pin. The plug fits only into anearthed electrical outlet. This is a safety feature. If the plug doesn't fit to the outlet, contact anelectrician to replace the outlet to avoid risk of electric shock. Never use an earthed adapter plugto connect the product to the electrical outlet that has no earth connection terminal.Improper connection of a grounding conductor may cause electric shock.• Plug the power cord directly into a grounded electrical outlet. To prevent overheat and a fireaccident, do not use an extension cord, a multi-plug adaptor or a multiple connector. Consult yourlocal Xerox representative to check if an outlet is grounded.• Connect this product to a branch circuit or an outlet that has larger capacity than the ratedampere and voltage of this product. See the data plate on the rear panel of this product for itsrated ampere and voltage.• Never touch the power cord with wet hands. It may cause electric shock.• Do not put an object on the power cord.• Always keep the plug connection free of dust. The dusty and damp environment may bring aboutminute electric current in a connector. It may generate heat and eventually cause a fire accident.• To avoid the risk of electric shock and a fire accident, only use the power cord supplied with thisproduct or the ones designated by Xerox.The power cord is exclusive use for this product. Do not use it for any other product.Do not damage or alter the power cord. Damage and alteration may generate heat andeventually cause electric shock or a fire accident.If the power cord is damaged or insulated wires are exposed, contact your local Xeroxrepresentative for its replacement. Do not use a damaged or uninsulated cord to avoid the risk ofelectric shock and a fire accident.