Before Using the MachineXerox® Wide Format IJP 2000User Guide1-5Power SourceSwitching the Power OnThe machine warms up and becomes ready to print within about 10 minutes after being powered on.The Energy Saver feature allows you to reduce the power consumption of the machine, savingelectricity.CAUTION: Do not turn off the power immediately after turning the power switch on. If you turnthe power off before the "Ready" message appears on the touch screen, the system could bedamaged.NoteThe machine consumes 11W or less even when the power switch is turned off. To avoid consuming(or save) this standby power, turn the power breaker OFF. For information on how to do this, referto Saving Power Consumption While the Machine is not in Use on page 1-6.For information on the Energy Saver feature, refer to Energy Saver Mode on page 1-7.1. Press the power switch to the | position to switch the power on.NoteThe "Please wait..." message indicates that the machine is warming up. The machine cannot beused while it is warming up.Switching the Power OffSwitch the power off at the end of a day or if the machine is not used for a long time.1. Press the power switch to the position to switch the power off.Notes– Do not switch the power off in the following conditions. Otherwise, the data being processedmay be erased.– Data is being received (the Transmitting indicator on the control panel is blinking)– Printing is being processed– After paper is completely output, wait for five seconds or more before switching the poweroff.
