System Administrator Menu SettingsXerox® Wide Format IJP 2000User Guide5-20IPv6 Address - ManualEnter the IP address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx is ahexadecimal value.Notes– You can fill in this field only when IPv6 Address Manual Set is set to Enabled.– You must enter an IP address before you can select Save.IPv6 Address PrefixSet the IP address prefix in the range of 0 to 128.The factory default is 64.NoteThis option is enabled only when IPv6 Address Manual Set is set to Enabled.IPv6 Gateway - ManualEnter the Gateway address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx isa hexadecimal value.Notes– This option is enabled only when IPv6 Address Manual Set is set to Enabled.– You must enter a gateway address before you can select Save.IPv6 Address - AutoThis field displays the Link-local address, IPv6 address, and Gateway address that have beenautomatically configured.SSL / TLS Settings1. Press SSL / TLS Settings.2. Set each item as necessary, and click Close.