Xerox® Wide Format IJP 2000User GuidexviiiOperational SafetyWarning NotesWARNING:• Do not carry out any other maintenance procedures not described in the documentation.• This product features safety design not to allow operators access to hazard areas. The hazardareas are isolated from operators by covers or protectors which require a tool to remove. Toprevent electric shock and injuries, never remove those covers and protectors.• To avoid the risk of electric shock and a fire accident, switch off and unplug the product promptlyin the following conditions, then contact your local Xerox representative.– The product emits smoke or its surface is unusually hot.– The product emits unusual noise or odor.– The power cord is cracked or worn down.– A circuit breaker, fuse or any other safety device becomes activated.– Any liquid is spilled into the product.– The product is soaked in water.– Any part of the product is damaged.• Be careful not to injure your fingers when using the cutter to cut the roll paper.• Do not insert any object into slots or openings of this product.Do not put any of the followings on the product:– Liquid container such as vases or coffee cups– Metal parts such as staples or clips– Heavy objectsIf liquid is spilled over or metal parts are slipped into the product, it may cause electric shock or afire accident.• Do not use conductive paper such as origami paper, carbonic paper or conductively-coated paper.When paper jam occurs, it may cause short-circuit and eventually a fire accident.• When cleaning this product, use the designated cleaning materials exclusive to it. Other cleaningmaterials may result in poor performance of the product. Never use aerosol cleaners to avoidcatching fire and explosion.Caution NotesCAUTION:• Always follow all warning instructions marked on or supplied with this product.• To avoid the risk of burn injuries, never touch the area with the "High Temperature" mark on.• Keep electrical and mechanical safety interlocks active. Keep the safety interlocks away frommagnetic materials. Magnetic materials may accidentally activate the product and cause injuriesor electric shock.