Daily Management and MaintenanceXerox® Wide Format IJP 2000User Guide3-14Cleaning the MachineThis section describes how to clean the machine.WARNING: When cleaning this product, use the designated cleaning materials exclusive to it.Other cleaning materials may result in poor performance of the product. Never use aerosolcleaners, or it may catch fire and cause explosion.CAUTION: When cleaning this product, always switch off the power, and unplug the product.Access to a live machine interior may cause electric shock.Notes– Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on themachine as doing so may discolor, deform, or crack covers.– If it is difficult to remove dirt, try gently wiping with a firmly wrung soft cloth moistened witha small amount of neutral detergent. Then, wipe with a dried cloth.– Do not use cleaning agents other than water or neutral detergent.– Cleaning the machine with an excessive amount of water may cause the machine tomalfunction or damage paper during printing.– You can get some of the ink on your hands while performing cleaning procedures. It isrecommended that you wear disposable gloves while performing cleaning.Removing Ink Stains in the Print Head Side of the Print UnitIf the print head side of the print unit is dirty, it causes ink drops to be attached on the print surface.NoteIf the print surface gets dirty after ink stains on the print head were removed, consult your localXerox representative.1. Turn off the power switch ( ) and the power breaker of the machine ( ).NoteTurn off the power switch and the power breaker when cleaning to avoid the risk of electric shock.1 21 2
