Xerox® CentreWare® Internet ServicesXerox® Wide Format IJP 2000User Guide2-5Starting CentreWare Internet ServicesThe following describes how to connect to CentreWare Internet Services from your computer.1. Start your web browser.2. Enter the machine's IP address or Internet address in the browser address field, and press theEnter key.IP address entry example:Example - http://192.168.0.101Internet address entry example (When the machine's Internet address is myhost.example.com):Example - http://myhost.example.comNotes– If your network uses DNS (Domain Name System) and the machine's host name is registeredin the domain name server, you can access the machine using the Internet address whichconsists of the host name and the domain name. For example, if the host name is myhost,and the domain name is example.com, then the Internet address is myhost.example.com.– Ask your system administrator for the IP address or Internet address.– When specifying a port number, enter the IP address or the Internet address followed by acolon (:) and the assigned port number.– If you have enabled encrypted communication by selecting the Enabled check box underNetwork Settings > Protocol Settings > HTTP > Secure HTTP (SSL) on the Properties tab,you need to enter the address beginning https instead of http in the browser address field inorder to access CentreWare Internet Services.IP address entry example:Example - https://192.168.1.1/Internet address entry example:Example - https://myhost.example.com/– If authentication while attempting to log in as system administrator fails, the followingmessage is displayed in the right frame of web browser:Login failed.– If the number of times of failed attempts to log in as system administrator exceeds the limitallowed, the following message is displayed in the right frame of web browser:Switch the machine Off and then On for System Administrator login.– If you encounter problems during setup, refer to Problems with CentreWare Internet Serviceson page 4-8.