Xerox® CentreWare® Internet ServicesXerox® Wide Format IJP 2000User Guide2-8Machine SettingsThe following describes how to configure the settings at the machine user interface.NoteCentreWare Internet Services can also be used to make these settings. For details, refer to the Helpsection which can be displayed by clicking Help in the upper right of the CentreWare InternetServices screen.1. On the System Administrator Menu screen, press System Settings > Network Settings.NoteFor information on how to display the System Administrator Menu screen, refer to SystemAdministrator Menu Settings Overview on page 5-2.2. Check that LPD is set to Enabled for Port Settings.For information on the LPD port setting, refer to Port Settings on page 5-17.3. Press Close to return to the Network Settings screen.NoteWhen the machine is already assigned an IP address, go to step 7.4. Press Protocol Settings > IPv4 - IP Address.5. Specify the IP address using the numeric keypad.6. Press Save.7. Press Close several times until the System Administrator Menu screen displays.8. Press Close.NoteWhen a message prompting you to reboot the machine appears, follow the message to reboot themachine.