Xerox Wireless Print Solutions Adapter User Manual
Also see for Wireless Print Solutions Adapter: Installation and connection guide
                                                      | |
Contents
|
Network PageXerox® Wireless Print Solutions AdapterUser Guide23Wired (eth0) Network Link SettingsTo Configure Wired Network Link Settings• To view Wired Network (eth0) Interface status, on the Network page, select Wired Network > Link.• To modify Wired Network (eth0) Interface settings, on the Network page, select WiredNetwork > Link > Configuration.Physical link parameters can be configured for an Ethernet (eth0) Network Interface.• When speed is Auto, duplex must be Auto or Half.• When speed is not Auto, duplex must be Half or Full.• Fixed-speed Full duplex produces errors when connected to Auto, due to duplex mismatch.Wireless (wlan0) Network Interface SettingsThis page is used to configure and view the status of the wlan0 interface on the device. To see the effect ofthese items after a reboot, view the Status page.To Configure Wireless Network Interface Settings• To view the Wireless Network (wlan0) Interface status, on the Network page, then selectWireless Network > Interface.• To modify Wireless Network (wlan0) Interface settings, on the Network page, selectWireless Network > Interface > Configuration.Wireless (wlan0) Network Link SettingsYou can select and name up to four WLAN Profiles for automatic connection to wireless networks.To Configure Wireless Network Link Settings• To view Wireless Network (wlan0) Interface status, on the Network page, selectWireless Network > Link.• To modify Wireless Network (wlan0) Interface settings, on the Network page, selectWireless Network > Link > Configuration.WLAN Scan/Quick ConnectTo view the WLAN Link Scan and Status information, on the Network page, select WLAN Scan/QuickConnect. |
Related manuals for Xerox Wireless Print Solutions Adapter
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine