Xerox Wireless Print Solutions Adapter User Manual
Also see for Wireless Print Solutions Adapter: Installation and connection guide
                                                      | |
Contents
|
Xerox® Wireless Print Solutions AdapterUser Guide338Diagnostics PageTo access the Diagnostics page, log into the Web Manager, then click the Diagnostics tab. The Diagnosticspage provides access to view and configure DNS settings, ping devices, view and configure networkingroutes, and run traceroutes.DNSThe primary and secondary DNS addresses come from the active interface. DHCP overrides the staticaddresses from the Network Interface configuration settings.To look up either the DNS host name or the IP address for an address, type the address or host name in thefield, then click Lookup.Accessing the DNS Settings1. To view the current DNS name or IP address, on the Diagnostics page, click DNS.2. To Configure the DNS Settings, on the Diagnostics page, click DNS, begin to enter the name of a DNShost, then click Lookup.3. To manually configure DNS servers, click the Network tab.– To configure for Wireless, click Wireless Network > Interface > Configuration.– To configure for a Wired connection, click Wired Network > Interface > Configuration.PingYou can use Ping to test connectivity to a remote host.To ping a Remote Host1. On the Diagnostics page, click Ping.2. For Host, enter the IP address or host name for the Wireless Print Solutions Adapter that you want toping.3. For Count, enter the number of ping packets that the Wireless Print Solutions Adapter attempts tosend to the Host. The default number of packets is 3.4. For Timeout, enter the time in seconds that the Wireless Print Solutions Adapter waits for a responsefrom the Host before it times out. The default time is 5 seconds.5. Click Submit. |
Related manuals for Xerox Wireless Print Solutions Adapter
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine