Xerox Wireless Print Solutions Adapter User Manual
Also see for Wireless Print Solutions Adapter: Installation and connection guide
                                                      | |
Contents
|
Administration PageXerox® Wireless Print Solutions AdapterUser Guide36To Configure Discovery1. To view or configure Discovery settings, in the Web Manager, click the Administration tab, then selectDiscovery.2. For UPnP Server State, select Enabled.3. For UPnP Server Port, enter the port you want the Wireless Print Solutions Adapter to use.4. Click Submit.HTTPHypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and servers.HTTP defines how messages are formatted and transmitted. It also defines the actions Web servers andbrowsers take in response to different commands. HTTP Authentication enables the requirement of usernames and passwords for access to the device.To View HTTP Statistics1. In the Web Manager, select the Administration tab.2. Click HTTP.3. Click Statistics.4. To view accumulated logs, click View.5. To clear accumulated logs, click Clear.To Configure HTTP Settings1. In the Web Manager, select the Administration tab.2. Click HTTP.3. Click Configuration.4. As required, modify the settings.5. Click Submit.To Configure HTTP Authentication1. In the Web Manager, select the Administration tab.DiscoverySettings DescriptionUPnP Server State Use this setting to allow the Wireless Print Solutions Adapter to be discovered by deviceson the network.UPnP Server Port To restore the default settings, leave UPnP Server Port blank. |
Related manuals for Xerox Wireless Print Solutions Adapter
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine