RegulatoryXerox® Wireless Print Solutions AdapterUser Guide52with any other antenna or transmitter. End users must be provided with specific operating instructions forsatisfying RF exposure compliance.Notice to Users in CanadaThe Wireless Print Adapter does not exceed the Class B limits for radio-emissions.CAN ICES-3 (B)/NMB-3(B)This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with a minimum distance of 20 centimeters between theradiator and your body.This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following twoconditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesiredoperation of the device.As a License-Exempt Local Area Network (LE-LAN) device, there are operational restrictions:(1) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potentialfor harmful interference to co-channel mobile satellite systems;(2) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725MHz shall comply with the e.i.r.p. limit; and(3) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply withthe e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LANdevices.Standards and NormsEmissions and ImmunityEuropean• EN 300 328• EN 301 489-01• EN 301 489-17• EN 301 893• EN 61000-3-3• EN 61000-3-2