Xerox Wireless Print Solutions Adapter User Manual
Also see for Wireless Print Solutions Adapter: Installation and connection guide
                                                      | |
Contents
|
Xerox® Wireless Print Solutions AdapterUser Guide71SafetyGeneral GuidelinesYour attention to the following safety guidelines helps to ensure the continued, safe operation of yourWireless Print Solutions Adapter.If any of these conditions occur, do the following:1. Remove power from the device.2. Call an authorized service representative.WARNINGS:• Do not push objects into slots or openings on the adapters.• Do not remove covers; there are no serviceable internal components• Do not place objects on the adapters or power cord.• Do not use outdoors.• Do not place in an area where people can step on the power cord.• Only use the power adapter provided; it is matched for use with the print adapter.• Ensure that the Voltage (V) and Frequency (Hz) of your mains electrical outlet is withinthe ranges stated on the power adapter.• Plug the power adapter directly into a properly grounded electrical outlet.• Do not wrap the power cord around the power adapter.• When you disconnect the power adapter, pull on the plug; do not pull on the powercord.The following are hazards to your safety:• The power cord is damaged or frayed.• Liquid is spilled into a device.• A device is exposed to water.• The device emits smoke, or the surfaces are unusually hot.• The device emits unusual noise or odors.• The device causes a circuit breaker, fuse, or other safety device to activate. |
Related manuals for Xerox Wireless Print Solutions Adapter
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine