Initial Setup22 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterSystem Administrator Guide3. Touch System Settings, then touch General.4. Touch OffHook Wake Up.5. To have the printer leave Energy Saver mode when you pick up the handset of the externaltelephone, touch On.6. Touch OK.Setting the Auto Log Print1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings.3. Touch System Settings, then touch General.4. To print a job history log after every 20 print jobs automatically, touch Auto Log Print.5. Touch On.6. Touch OK.7. At the Restart System prompt, touch Close.Configuring the TimersUse the Timers menu to set the timeouts for the control panel touch screen, for faults, and for jobs beingsent to the printer.To configure the timers:1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings.3. Touch System Settings > Timers.4. To set the delay before the control panel times out, touch Control Panel, touch the delay that youwant, then touch OK.5. To set how long the printer waits before canceling a print job that stops abnormally:a. Touch Fault Timeout > On.b. To enter a delay time, use the keypad. The range is 3----300 seconds.c. Touch OK.6. Touch the Back arrow to return to the previous menu, or press the Services Home button to returnto Service Home.Configuring Output SettingsUse this menu to configure settings concerning the output of the printer.1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings.3. Touch System Settings, then touch Output Settings.
