Network ConnectivityXerox ® WorkCentre® 3615 Black and White Multifunction Printer 37System Administrator Guide7. Enter the passcode for the selected network, then touch OK.8. To view the new IP address and ensure that the connection is successful, print a ConfigurationReport.Connecting to a Wireless Network ManuallyBefore you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryptiontype, and passphrase. For details, see Collecting Wireless Network Information for Connecting to aWireless Network Manually on page 36.To connect to a wireless network manually:1. At the printer control panel, press the Machine Status button.2. Touch the Tools tab.3. Touch Admin Setting > Network > Wi-Fi.4. Touch Wi-Fi Setup Wizard.5. Select Manual SSID Setup, then touch Next.6. Enter the network SSID, then touch Next.7. Select the Infrastructure type, then touch Next.8. Enter the passcode for the selected network, then touch OK.9. To exit the menu, touch OK.10. Restart the printer, then wait two minutes for the printer to connect.11. To view the new IP address and ensure that the connection is successful, print a ConfigurationReport.Connecting to a Wireless Network Using CentreWare Internet ServicesBefore you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryptiontype, and passphrase. For details, see Collecting Wireless Network Information for Connecting to aWireless Network Manually on page 36.Note: To use CentreWare Internet Services to set up the printer on a wireless network, connect theprinter to your computer through an Ethernet wired network.To connect to a wireless network manually using the CentreWare Internet Services:1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 12.2. Click Properties.3. In the Properties pane at the left of the window, under Physical Connection, click Wi-Fi.4. In the SSID field, enter the SSID.5. To select the Network Type, from the drop-down menu, select Infrastructure or AdHoc.Note: Infrastructure provides the greatest selection of security options. AdHoc provides only WEPencryption in most networks.
